Operating instructions

9.3 Tape Lifter/Shield Assembly: KR-6B/ZA-72S
No. Description Part No. Notes
1 Bracket, Solenoid KR6B009
2 Solenoid GP1B06
3 Pin, Solenoid KZ5A003
4 Bar, Connector KR6B006
5 Stopper, A KR6B007
6 Stopper, B KR6B010
7 Stopper, Rubber KR6B011
8 Angle, Dumper Actuate KR6B005
9 Air Pot, AD-2" T x H-3 AS5048
10 Holder, Dumper KR6B008
11 Link, Sub Assembly A, Lifter KR6B001 for 2"
12 Link, Sub Assembly B, Lifter KR6B002 for 2"
13 Pin, Lifter KR6A009
14 (not assigned)
15 Spring GS1090
16 Collar, Screw KA6A021
17 Plate, Elevate Shielding ZA72B03
18 (not assigned)
19 Plate, Photo Interrupt Actuator ZA72S09
20 Block, Shield Guide ZA72B01
21 Nut, Lead ZA72B08
22 Plate, Nut Holding ZA72B05
23 Shaft, Guide ZA72S07
24 Screw, Lead ZA72B07
25 (not assigned)
26 (not assigned)
27 Coupling PZ1A037
28 (not assigned)
29 P.C.B. Ass'y, Motor PB-74F
30 P.C.B., Photo Interrupter PB-78F
31 Retaining Ring, E Type F74TE24
32 Retaining Ring, E Type F74TE09
33 Diode, SM1-02 PNSM1-02
*34 Link, Sub Ass'y A, Lifter KR1B001 For 1"
*35 Link, Sub Ass'y B, Lifter KR1B002 For 1"
36 Bar, A Connection KZ3A156
37 Bar, B Connection KZ3A155
38 P.C.B., A Photo Interrupter PB-78F
39 Shielding Base ZA72S08
*No. 34 and No. 35 are used in only early machine and No. 11 and No. 12 are
used instead in later machine.
Section 9 Exploded Views and Parts Lists
9 - 6
April 1992
MTR-90III Operation and Maintenance Manual