Installation Guide

ManualsBrandsArrow ManualsMetal Storage Sheds(Common: 10-ft x 14-ft; Interior Dimensions: 9.85-ft x 13.125-ft) Galvanized Steel Storage Shed

1 Attach the right and left side

roof trim to the lower end of the roof

panels on each side of the building

using screws at each panel overlap.

NOTE

A single screw fastens both trim

pieces at the overlap.

2 Using your thumb and index

ﬁ nger, overbend the bottom ﬂ ange

of the side roof trim at the corner

inward enough so the right and left

roof trim caps ﬁ t onto right and left

corners.

3 Fasten the roof trim caps to the

side trim using a screw.

 6893 Left Side Roof Trim (2)

 6892 Right Side Roof Trim (2)

 6015 Side Roof Trim (2)

Step 18

ST31

 Parts Needed For 

Roof Trim

STEP

STEP

3

6892

Tuck Flange

Inward to Fit

Inside of

Roof Trim Cap

2

STEP

1

6015

6893

6893

6015

6892

Roof Trim Cap

Roof Trim

31