Installation Guide

ManualsBrandsArrow ManualsMetal Storage Sheds(Common: 10-ft x 14-ft; Interior Dimensions: 9.85-ft x 13.125-ft) Galvanized Steel Storage Shed

 Parts Needed For 

Roof Beam/Braces

Step 13

SS26

 Main Roof Beam Assembly (1)

 6227 Roof Beam Brace (2)

1 Fasten the track supports to the

front gable assembly only, as shown.

2 Wrap the weather stripping along

the mating edge of the large left

and right gables as shown. Cut the

weather stripping to length.

3 Spread the two halves of the double

roof beam and fasten to the gable

brace of the front gable.

STEP

6

STEP

2

Roof Beam Brace 6227

STEP

7

Roof Beam (Double)

4 Fasten the other end of the double

roof beam to the gable brace of the

rear gable.

5 Fasten a roof beam brace to the

double roof beam behind the front

gable by placing the tab on the end

of the brace between the roof beams.

Align the tab with the second hole and

fasten the brace with a bolt and nut.

6 Fasten the lower end of the roof

beam brace to the track support

with a bolt and nut.

7 Fasten a roof beam brace be-

tween the rear gable and the roof

beam at the ﬁ rst hole, as shown.

STEP

5

STEP

4

STEP

3

Spread Two Halves

Of Roof Beams

STEP

1

Track Supports 6228

Weather Stripping

Roof Beam Brace 6227

26