Installation Guide

The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1 Apply edge trim to the edge of
the large left gables and the large
right gables, cut to length.
2 Join the large gables to the small
gables on the left and right sides us-
ing four bolts, washers and nuts on
each side. This part of the gable is
called the outer gable leg.
3 Attach the four roof beam
brackets to the outer gable legs using
two bolts in the two bottom holes of
each bracket.
4 Attach the four mid gable braces
to the gables using three bolts, wash-
ers and nuts.
NOTE
Mounting leg of brace must face
toward center of gable
 Parts Needed For 
Gable Assemblies
Step 11
ST24
 7858 Large Right Gable (2)
 7859 Large Left Gable (2)
 6114 Small Right Gable (2)
 6115 Small Left Gable (2)
 6085 Roof Beam Bracket (4)
 7860 Mid Gable Brace (4)
STEP
1
STEP
2
Washer
6085
Roof Beam Brackets
7859
6115
67521 Edge Trim
(Plastic Piece)
FRONT
STEP
3
STEP
4
7860
7858
6114
24