Installation Guide

The splice posts support the walls.
1 Position a rear splice post at the
center of the rear wall and fasten us-
ing 2 nuts and bolts into rear wall angle
and 2 screws into rear fl oor frame.
Hint: Measure or count holes to
determine if post is centered on rear.
2 Fasten side splice posts to the
sides of building using screws into
side wall angles and side fl oor frames.
Angled end of post must be on top.
 5287 Rear Splice Post (1)
 5283 Side Splice Post (2)
 Parts Needed For 
Splice Post
Step 7
SS20
5283
STEP
FRONT
ANGLED END OF
SPLICE POST MUST
BE ON TOP
5283
5287
2
STEP
1
5287
20