Use and Care Guide

WORK AREA

Keep the work area clean and well lighted. Cluttered benches and dark areas increase

the risks of accidents.

Do not operate the tool in presence of flammable liquids, gases or dust. The tool

potentially creates sparks which could ignite.

Keep bystanders, children, and others away while operating the tool. Distractions

could result in improper use and cause injury.

Avoid unintentional misfires. Always use caution to avoid accidentally firing. Do not

point towards yourself or anyone whether it contains fasteners or not.

General Safety Rules

PAGE 1
General Safety Rules WORK AREA Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of accidents. Do not operate the tool in presence of flammable liquids, gases or dust. The tool potentially creates sparks which could ignite. Keep bystanders, children, and others away while operating the tool. Distractions could result in improper use and cause injury. Avoid unintentional misfires. Always use caution to avoid accidentally firing.
PAGE 2
General Safety Rules PERSONAL SAFETY Always wear eye protection. Operator and others in the work area should always wear ANSI-approved safety goggles with side shields. Eye protection is used to guard against flying fasteners and debris, which may cause severe eye injury. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise may cause hearing loss. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.