Instructions / Assembly

If the locality where you have installed
the patio cover/carport could benefit
from a guttering system, we recom-
mend the following list of materials,
(not included).
● ●
● ●
● One 10' gutter (304,8 cm)
● ●
● ●
● One downspout
● ●
● ●
● One outlet
● ●
● ●
● One right & One left end cap
● ●
● ●
● Sealant
● ●
● ●
● Five hidden hangers
with five 1 1/2" (38 mm) bolts and
nuts
● ●
● ●
● Three standard elbows
● ●
● ●
● Two bands
with four sheet metal screws
1 Assemble the gutter on the ground
using sealant.
2 Temporarily remove top front trim,
lift assembly to unit and mark top left
and right end trim where gutter meets
trim. Remove gutter system and notch
(using tin snips) top L&R end trim so
gutter fits flush along front of unit.
3 Evenly space out five hidden hang-
ers in gutter, making sure one is in the
outlet. Attach gutter assembly to front
facia/ front roof channel using five 1
1/2" (38 mm) bolts and nuts through
hidden hangers. Replace top front
trim.
4 Assemble the downspout on the
ground.
5 Hold in place on outlet. Attach to
post with two bands. Drill 3/32" (2
mm) holes and fasten with sheet metal
screws.
Suggested Guttering System (not included)
BO23
23
Outlet
Gutter
Left End Cap
Elbow
Elbow
Elbow
Downspout
Band
Post
Screw
Top Front Trim
Top End Trim
1 1/2" (38 mm) Bolt
Nut
Notch
Hidden Hanger
Gutter