Installation Guide

31
You will need for this page:
Step 11: Continued
Working with one Gable at a time, attach the front
Gables to the Door Track with screws. Do not insert
screws into the two (2) holes closest to the peak of each
Gable. These will be used to attach the Track Support later.
7
To secure Gables together, position the Gable Brace
as shown and insert a single bolt and nut through the
second hole from the bottom only.
8
Leave two (2) holes open on each side of the Gable peak to attach Track Support.
9
Position Track Support as shown. Secure Track
Supports to Gable using one (1) bolt and nut. Secure to
Door Track using two (2) screws per side.
(QTY: 2)
Gable Brace
1
6636
Track Sup.
2
(QTY: 18)
31BI
Attach Brace with bolt through
second hole from bottom only
Install Track Support.