Installation Guide

37
You will need for this page:
Step 13: Continued
(QTY: 72)
(QTY: 20)
37BJ
9086
Right Roof
Panel
1
9087
Left Roof
Panel
1
Roof Panel
2
7743
Ridge Cap
1
6869
Back
Front
7743
7743
9087
9086
6869
Continue to apply weather stripping.
Attach Roof Panels, one at a time, to Roof Beams using eight (8) screws per
Panel. Insert bolt and nut in middle hole where ribs overlap.
12
DO NOT secure end of Ridge Caps
until Peak Caps are in place.
DO NOT fully tighten Ridge Cap bolts
until you have both Ridge Cap bolts in
place. This will ease assembly. Bolts must be fully
tightened before moving on to the next page.
Attach Front Left and Right Roof Panels, one at a time, to Roof Beams using
eight (8) screws per Panel. Insert bolt and nut in middle hole where ribs overlap.
13
Secure Front Roof Panels to Gables using six (6) bolts and nuts per Gable.
14
Attach Long Ridge Cap with four (4) bolts and nuts. DO NOT secure end of Ridge
Caps until Peak Caps are in place.
16
Finish Weather Stripping the Roof and cut the tape just past the end of the Roof.
Fold end of tape under roof edge.
15
On both sides of the building, secure the bottom of Roof Panels to the Side Wall
Angles using four (4) screws per Panel.
17