Installation Guide

27
(QTY: 66)
Assemblies from Step 2:
Rear Wall Channel Assembly (1)
Side Wall Channel Assemblies (2)
You will need for this page:
Insert bolts where Channels meet.
Step 10: Wall Channels
Install Rear Wall Channel by placing screws
through all remaining holes in Wall Panels.
1
3
Install Front Wall Channels by placing screws
through all remaining holes in Wall Panels.
Insert two (2) bolts and nuts in both rear
corners where Side and Rear Wall Channels meet.
2
Install Side Wall Channels by placing screws
through all remaining holes in Wall Panels.
Front Channel
2
9365
Install Channels on inside of building.
27AW
(QTY: 4)