Installation Guide

Six (6) holes align.

Two (2) holes align.

Finished Length

142 3/8” 361,6 cm

CHECK THAT ALL ASSEMBLED PARTS ARE

THE CORRECT LENGTH BEFORE CONTINUING

End View of Double Beam

BUILD ONE (1) BEAM

10397

You will need for this page:

Step 3: Continued

Overlap two (2) Roof Beams so that bottom slots

align but DO NOT INSERT BOLTS. Next, overlap

two (2) more Roof Beams to form a second Roof

Beam Assembly. DO NOT INSERT BOLTS .

Insert four (4) bolts and nuts into slots from bottom.

Check that the ﬁ nished length of the Assembly is

142 3/8” (361,6 cm). Set aside for use in Step 12.

Place both Roof Beam Assemblies back-to-

back to form a Double Beam. Insert ten (10)

bolts and nuts as shown below.

Place two (2) bolts thru slots

on each side of the Beam.

(QTY: 14)

Roof Beam

10397

19BJ