Specifications

SAFETY PRECAUTIONS
550 Gas/LP 330650 (3--11)
6
5. Before Leaving Or Servicing Machine:
-- Stop On Level Surface.
-- Set Parking Brake.
-- Turn Off Machine And Remove Key.
6. When Servicing Machine:
-- AvoidMovingParts.DoNotWear
Loose Jackets, Shirts, Or Sleeves.
-- Block Machine Tires Before Jacking
Machine Up.
-- Jack Machine Up At Designated
Locations Only. Block Machine Up
With Jack Stands.
-- Use A Hoist Or Jack That Will Support
The Weight Of The Machine.
-- W ear Eye And Ear Protection When
Using Pressurized Air Or W ater.
-- Disconnect Battery Connections
Before Working On Machine.
-- Avoid Contact With Battery Acid.
-- Avoid Contact With Hot Engine
Coolant.
-- Allow Engine To Cool.
-- Keep Flames And Sparks Away From
Fuel System Service Area. Keep Area
Well Ventilated.
-- Use Cardboard To Locate Leaking
Hydraulic Fluid Under Pressure.
-- Use TENNANT Supplied Or Approved
Replacement Parts.
7. When loading/unloading machine
onto/off truck or trailer:
-- Turn off machine.
-- Use truck or trailer that will support
the weight of the machine.
-- Use winch. Do not drive the machine
onto/off the truck or trailer unless the
load height is 380 mm (15 in) or less
from the ground.
-- Set parking brake after machine is
loaded.
-- Block machine tires.
-- T ie machine down to truck or trailer.
Home
Find...
Go To..