Specifications

MAINTENANCE
550 Gas/LPG 330650 (9--00)
66
3. EYEBOLTS
The eyebolts should be adjusted so there is
1.38 +
0.12 in (35 + 3 mm) between the end
of the eyebolt and the top of the arm on
each side of the squeegee.
C
A
B
01726
EYEBOLT
A. Eyebolt
B. 1.38 +
0.12 in (35 + 3 mm)
C. Arm
4. CAST ERS
The caster should be in good condition and
be free to spin. The center caster should be
0.25 +
0.06 in (6 + 2 mm) off the floor with
the squeegee blade perpendicular to the
floor. The tip casters should touch the floor
with the squeegee blade perpendicular to
the floor .
5. ARM CLEARANCE
The distance between the arm assembly
and the squeegee lift shaft arm should be 1
to 1.25 in (25 to 30 mm) with the squeegee
blade down and perpendicular to the floor.
B
A
C
01728
ARM CLEARANCE
A. Arm Assembly
B. Squeegee Lift Shaft Arm
C. 1to1.25in(25to30mm)
Home
Find...
Go To..