Specifications

MAINTENANCE
33
550 Gas/LPG 330650 (9--00)
MACHINE PIVOT
There are four grease fittings which are used to
lubricate the machine pivot assembly. There is an
upper bearing grease fitting, a lower bearing
grease fitting, and a grease fitting on each rod
end of the steering cylinder. Apply grease to these
fittings after every 50 hours of operation. Use a
Lubriplate EMB grease (TENNANT Part No.
01433--1).
B
C
A
00251
MACHINE PIVOT
A. Upper Bearing Grease Fitting
B. Machine Pivot
C. Steering Cylinder Rod End Grease
Fitting
SCRUB HEAD PIVOT
There are four grease fittings which are used to
lubricate the scrub head pivot assembly----one on
each of the four scrub head pivot blocks. Apply
grease to these fittings after every 50 hours of
operation. Use a Lubriplate EMB grease
(TENNANT Part No. 01433--1).
A
B
03790
SCRUB HEAD PIVOT
A. Pivot
B. Grease Fitting
A
B
03791
SCRUB HEAD PIVOT
A. Scrub Head
B. Grease Fitting
Home
Find...
Go To..