Specifications

MAINTENANCE
550 Gas/LPG 330650 (2--05)
32
LUBRICATION
ENGINE
Check the engine oil level daily.
The engine should be lubricated with SAE--SE/SF
rated engine oil. Change the engine oil and oil
filter after every 50 hours of operation. Change
the engine oil more frequently if the environment
is extremely dusty.
The following oil grades are recommended for
engines operating in the ambient temperatures
listed.
MULTI--VISCOSITY OILS
Below 32_F -- 1 0 _ to 90_F -- 1 0 _ to above 90_F Above 10_F
(Below 0_C) (--23_ to 32_C) (--23 to above 32_C) (Above --12_C)
(
)
5W 30
(
)
10W 30
(
)
10W 40
(
)
20W 40
The engine oil capacity of Continental Engines
(machines below serial number 006409) is 7 qt
(6.6 L) with filter.
The engine oil capacity of GM Engines (machines
serial number 006409 and above) is 5 qt (4.7 L)
with filter. On GM engines, the oil fill is under the
breather cap.
VACUUM F AN SHAFT (For machines below
serial number 007006)
There is one grease fitting which is used to
lubricate the vacuum fan shaft. Grease the
vacuum fan bearings after every 50 hours of
operation. The vacuum fan grease fitting is
covered with a plastic cap. Snap the cap open
and apply Lubriplate EMB grease (TENNANT
Part No. 01433--1) to the vacuum fan grease
fitting. Wipe off all excess grease and replace the
grease fitting cap.
B
A
03789
VACUUM F AN
A. Vacuum Fan
B. Grease Fitting
Home
Find...
Go To..