Specifications

OPERATION
550 Gas/LPG 330650 (9--00)
26
10.Tie the rear of the machine under the rear
bumper at the two bumper mounts.
A
REAR TIE DOWN LOCATION
A. Rear Bumper Mounts
11. If the machine is equipped with the optional
scrub head support legs, pull the pins to
lower the legs. Lock them into position again
by replacing the pins.
A
B
C
OPTIONAL SCRUB HEAD SUPPORT LEG
A. Scrub Head
B. Support Leg
C. Pin
12.If the loading surface is not horizontal or is
higher than 380 mm (15 in) from the ground,
use a winch to unload machine.
If the loading surface is horizontal AND is
380 mm (15 in) or less from the ground, the
machine may be driven off the truck or
trailer.
FOR SAFETY: When unloading machine
off truck or trailer, use winch. Do not
drive the machine off the truck or trailer
unless the loading surface is horizontal
AND 380 mm (15 in) or less from the
ground.
MACHINE JACKING LOCATIONS
Empty the recovery and solution tanks before
jacking the machine. The machine jacking
locations are labeled with a label. The tractor
jacking locations are behind each of the front
wheels, and the tank jacking locations are in front
of the rear wheels.
FOR SAFETY: When Servicing Machine,
Block Machine Tires Before Jacking
Machine Up. Jack Machine Up At
Designated Locations Only. Block
Machine Up With Jack Stands. Use A
Hoist Or Jack That Will Support The
Weight Of The Machine.
A
00362
TRACTOR JACKING LOCATION
A. Jacking Location
A
01820
TANK JACKING LOCATION
A. Jacking Location
Home
Find...
Go To..