Specifications

OPERATION
25
550 Gas/LPG 330650 (9--00)
4. Turn the bypass valve 90_ from the normal
position before winching the machine onto
the truck or trailer. See TOWING THE
MACHINE section of this manual. Make
sure the machine is centered.
FOR SAFETY: When loading machine
onto truck or trailer, use winch. Do not
drive the machine onto the truck or
trailer unless the loading surface is
horizontal AND is 380 mm (15 in) or less
from the ground.
A
B
BYPASS VALVE
A. Bypass Valve
B. Propelling Pump
5. Turn the machine so the pivot lock holes line
up, then insert the pin in the lined up holes.
The pin will prevent the machine from
pivoting and creating a pinch area. See
PIVOT LOCK PIN section of this manual.
W ARNING: Crush Hazard Between Front
And Rear Halves Of Machine. Engage
Pivot Lock.
B
C
A
00251
PIVOT LOCK PIN IN USE
A. Machine Trailer Section
B. Machine T ractor Section
C. Pivot Lock Pin
6. Position the machine onto the truck or trailer
as far as possible. If the machine starts to
veer off the centerline of the truck or trailer,
stop and turn the steering wheel to center
the machine.
7. Set the parking brake, lower the scrub head
and block the machine tires. Tie down the
machine to the truck or trailer at the six tie
down locations before transporting.
8. Tie the front of the machine at the two
corners of the front frame.
A
FRONT TIE DOWN LOCATION
A. Front Tie Down Holes
9. Tie the middle of the machine on the tie
down bracket on the rear of the tractor
frame.
A
MIDDLE TIE DOWN LOCATION
A. Middle Tie Down Bracket
Home
Find...
Go To..