Specifications

OPERATION
550 Gas/LPG 330650 (3--11)
20
Do not turn steering wheel too sharply when the
machine is in motion. It is very responsive to the
movement of the steering wheel. Avoid sudden
turns, except in emergencies.
T ry to scrub as straight a path as possible. Avoid
bumping into posts or scraping the sides of the
machine.
1. Drive the machine to the area to be
scrubbed.
2. Move the scrub head position lever to the
“RAISE” position to release the scrub head
lock.
3. Move the scrub head lock lever to the
“UNLOCK” position.
4. Place the squeegee switch in the “Down”
position.
5. Move the solution lever back to start the
solution flow.
For SRS machines: Turn the cleaning
solution knob to the desired cleaning
solution flow.
6. Move the scrub brush lever to the “ON”
position.
7. Scrub as required.
W ARNING: Flammable materials or
reactive metals can cause explosion or
fire. Do not pick up.
TO DRAIN AND CLEAN RECOVERY TANK AND
EMPTY HOPPER
1. Stop the engine and set the parking brake.
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, Turn Off
Machine And Remove Key.
2. Remove and unplug the tank drain hose
next to a floor drain.
00288
DRAINING RECOVERY TANK
00343
DRAINING SRS T ANK
3. Pull the debris trough lever to dump the
debris trough.
NOTE: If a more gentle dumping action is desired,
the trough can be dumped with the scrub head
lowered; then the head can be raised hydraulically
to slowly tip the trough.
B
C
A
00283
DUMPING DEBRIS TROUGH
A. Scrub Head
B. Debris Trough Lever
C. Debris Trough
Home
Find...
Go To..