Specifications

OPERATION
13
550 Gas/LPG 330650 (2--05)
BRAKE PEDAL
The brake pedal operates the brakes on the two
front wheels.
To stop the machine, return the directional control
pedal to neutral; then apply pressure to the brake
pedal.
DIRECTIONAL PEDAL
A single foot pedal controls the propelling drive.
The foot pedal is used to select the direction of
travel and the speed of the machine.
A
B
C
E
D
00116
DIRECTIONAL PEDAL
A. “Reverse” Position
B. “Neutral” Position
C. “Forward” Position
D. “Toe” Portion
E. “Heel” Portion
Gradually press the “toe” portion of the pedal for
forward travel or the “heel” portion of the pedal for
reverse travel. Regulate the speed of the machine
by varying the pressure on the pedal.
NOTE: Always use the brake pedal for normal
stopping and controlling machine speed on down
grades.
OPERATOR SEAT
The operator seat is of a fixed back style with a
forward-backward adjustment. To adjust the seat,
loosen the seat mounting bolts, slide the seat to
the position desired, and tighten the bolts.
SCRUB HEAD LOCK LEVER
The scrub head lock lever controls the scrub head
lock mechanism. This locks the scrub head,
preventing it from lowering.
To set the scrub head lock, fully raise the scrub
head. Then push the scrub head lock lever into
the “LOCK” position.
To release the scrub head lock, fully raise the
scrub head. Then pull the scrub head lock lever
into the “UNLOCK” position.
Always set the scrub head lock before working
under the scrub head. The scrub head lock must
also be set whenever the machine will not be
used for an extended period of time, overnight for
example. Flat spots on the brushes will appear if
the scrub head is left down for an extended period
of time.
W ARNING: Raised Scrub Head May Fall.
Block Scrub Head Up.
B
A
01816
SCRUB HEAD LOCK LEVER
A. Operator Seat
B. Scrub Head Lock Lever
SCRUB BRUSH LEVER
The scrub brush lever controls the scrub brush
motors. To start the scrub brushes rotating in their
normal direction, pull the lever into the “ON”
position. To stop brush rotation, move the lever
into the “OFF” position.
To start the scrub brushes rotating opposite their
normal direction for double scrubbing, push the
lever into the “REVERSE” position.
Home
Find...
Go To..