Installation Instructions

25
2 Fasten the roof panel ribs, peak
cap and ridge cap together using
bolts and nuts. Fasten the remaining
peak cap in the same manner.
3 Attach the side roof trim to the
lower end of roof panels on each side
of the building using screws at each
panel overlap.
4 Using your thumb and index fin-
ger, overbend the bottom flange of
the roof panel rib at the corner inward
enough so the right and left roof trim
caps fit onto right and left
corners.
Step 12
●●
●●
● 6869 Ridge Cap (1)
● ●
● ●
● 6015 Side Roof Trim (2)
● Parts Needed For ●
Ridge Cap/Roof Trim
1
Install the ridge cap on the com-
pleted roof section using bolts and
nuts.
Peak Cap
STEP
4
STEP
1
6869
Roof Trim Cap
STEP
5
5 Fasten the roof trim caps to the
side trim using a screw.
STEP
2
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
STEP
3
6015
Side Roof Trim
6015
C25