Installation Instructions

ManualsBrandsArrow ManualsOutdoorsGarden 8 x 3 Steel Shed

● Parts Needed For ●

Shelving/Channel/Tool Bar

Step 19

BE30

30

1

STEP

Tool Hook (5)

4

STEP

2

STEP

9884

1 Overlap the rear wall channel

pieces as shown in the figure to the

correct overall dimension.

●●

●●

● 9927 Rear Wall Channel (2)

●●

●●

● 9884 Shelf (4)

●●

●●

● 9897 Tool Bar (1)

2 Fasten the rear wall channel as-

sembly across the middle of the rear

wall using 13 screws.

3 Position a shelf inside rear wall

channel and slide to the end of build-

ing. Fasten using ten bolts and nuts

through panels.

Repeat Step 3 for the

opposite

shelf.

4 Install remaining two shelves

above the first two at the holes pro-

vided, using ten bolts and nuts.

5 Fasten the tool bar across the

upper rear wall using eleven screws

from the outside.

Tool Hooks slide along track to

any desired position.

Keeps rakes, shovels, brooms

and much more in a safe and

accessible location.

The Screw Driver Holder is

engineered for all types of hand

tools such as screwdrivers and

pliers. A total of seven hand

tools may be stored.

Install Cap Protectors to the

ends of the Tool Hooks

and Screw Driver Holder.

Cap Protector

9927

9927

77 5/8"

197,2 cm

9897

5

STEP

Screw Driver Holder(1)

9884

9884

3

STEP

Rear Wall

Channel Assembly

9884

Rear Wall Channel Assembly