Installation Instructions

● Parts Needed For ●
Roof Trim
Step 18
BE29
29
●●
●●
● 9898 Right Roof Trim (2)
●●
●●
● 9899 Left Roof Trim (2)
1
STEP
9898 Right Roof Trim
1 Overlap the right & left roof trim
pieces as shown in the figure and
fasten them together with one screw.
Make two assemblies.
2 Attach the roof trim assemblies to
the ends of the roof panels on the
front and rear of the building using
screws at each roof panel overlap.
3 Using your thumb and index fin-
ger, overbend the bottom flange of
the roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
4 Fasten the roof trim caps to the roof
trim using a screw.
5 Fasten the roof trim and peak cap
together using bolts and nuts.
6 Fasten the corner caps to the
ends of the header, using adhesive
pads.
9899 Left Roof Trim
Roof Trim Assembly
2
STEP
3
STEP
6
STEP
5
STEP
4
STEP
Roof Trim Cap
Peak Cap
Corner Cap
Adhesive Pad
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
98 1/8"
249,2 cm