Installation Instructions

● Parts Needed For ●
Wall Panels
Step 13
BE24
24
STEP
Be sure that you have the correct
panel in each position. Do this by
overlapping the panels and determin-
ing if the holes line up with the holes
in the frame.
9877
1
STEP
2
9876
9876
9875
9875
Crimped Rib
Underneath
Panels rest on
frame as shown
●●
●●
● 9875 Front Wall Panel (2)
●●
●●
● 9876 Wall Panel (2)
●●
●●
● 9877 Wall Panel (1)
Each wall panel has a crimped rib on
one side. The crimped rib should go
under the rib of the adjacent panel
that follows it.
1 Fasten all the wall panels at the
top and bottom with screws. Attach
panels with extra holes facing up.
2 Fasten overlapping ribs using two
screws and a bolt with nut.