Installation Instructions

● Parts Needed For ●
Header/Door Header
Assembly
Step 7
QR18
18
STEP
1
3
STEP
9945
2
STEP
10184
9947
END VIEW
The header assembly is made up of
two pieces. The door header assem-
bly is made up of two pieces. The
illustrations below show the proper
overall length for the header/door
header assembly. Proceed as fol-
lows:
1 Place the outer header as shown.
Snap the main header over the outer
header. See the illustration for the
proper overall length of the header
assembly.
2 Place the outer door header as
shown. Snap the main door header
over the outer door header. See the
illustration for the proper overall
length of the door header assembly.
3 Double check the length of each.
The header/door header combo rein-
forces the front wall and roof. It is
made up of two assemblies.
4 Positioning the door header as
shown, attach the header to the door
header using 13 screws along entire
length. Set this piece aside for later
use.
●●
●●
● 10184 Main Door Header (1)
●●
●●
● 9947 Outer Door Header (1)
●●
●●
● 9945 Main Header (1)
●●
●●
● 9889 Outer Header (1)
Header Assembly
Door Header Assembly
Door Header Assembly
Header Assembly
STEP
4
Door Header Assembly
Header Assembly
9889
92 3/4"
235,6 cm
95 13/16"
243,4 cm