Installation Instructions

Step 1
BE13
● Parts Needed For ●
Floor Frame Assemblies
●●
●●
● 9866 Outer Front Floor Frame (2)
●●
●●
● 10201 Center Front Floor Frame (1)
●●
●●
● 9868 Rear Floor Frame (2)
13
STEP
1
9868
Front Floor Frame 95 1/4" 241,9 cm
9868
Rear Floor Frame 95 1/4"
241,9 cm
STEP
2
STEP
3
The front floor frame is made up of
three pieces. The rear floor frame is
made up of two pieces. The holes in
these pieces will align when the piec-
es are positioned with correct amount
of overlap. The illustrations below
show the proper overall length for the
rear and front. Proceed as follows:
1 Place the outer front floor frames
as shown. Position the center front
floor frame on top of the two outer
front floor frames. Join the frames by
inserting six bolts and nuts.
2 Overlap the rear floor frames as
shown. The holes in these pieces
will align when the pieces are posi-
tioned with correct amount of over-
lap. See the illustrations below for
the proper overall length of the rear
floor frame. Join the frames by insert-
ing three bolts and nuts as shown.
3 Double check the length of each.
95 1/4" 241,9 cm Rear
95 1/4" 241,9 cm Front
10201
9866
9866