Use and Care Manual

16
Step 1: Continued
16BY
10307
10307
Bring Top Panel down fl at while
maintaining pressure in the middle
to keep edge hooked.
Always cover
the Arrow.
Raise Panel at Angle.
2
Hook Edge of Top Panel to
Bottom Panel.
4
3
Overlap Panels
and Align Ends.
ALWAYS COVER
THE ARROW
maintaining
pressure
5
Top Panel
Bottom Panel
Top Panel
Bottom Panel
Apply pressure in
area shown
Start in middle of assembly to snap
Panels together.
6
Push down to snap Panels together
working from center outward in both
directions.
7
Push down to snap end of
Panels together.
8
MUST USE FLAT SOLID SURFACE. DO
NOT SNAP ON GROUND OR GRASS