01BY 722630717 Owner’s Manual & Assembly Guide Model No. EZ6565LVCR EZ6565LVCRCC EZ6565LVCC EZ6565LVCCCR Gloves must be worn at all times to reduce risk of injury! www.arrowsheds.com EZ6565LVCREU EZ6565LVCRCCEU EZ6565LVCCEU EZ6565LVCCCREU 6’ x 5’ Nominal Size EZEE SHED TM Customer Service: 1-800-851-1085 or assist@arrowsheds.com How-to-Assemble Video http://www.shelterlogic.com/ezee BUILDING DIMENSIONS Approx.† Size 6’ x 5’ 1,8 m x 1,4 m Storage Area 25 Sq. Ft. 140 Cu. Ft.
GB: Assembly manual in additional languages available online. Scan QR code below to access. FR: Manuel de montage disponible en ligne dans d’autres langues. Pour y accéder, scannez le code QR ci-dessous. SP: Manual de montaje en idiomas adicionales disponible online. Escanee el código QR a continuación para acceder. DE: Montageanleitung in zusätzlichen Sprachen online verfügbar. Scannen Sie den QR-Code unten, um darauf zuzugreifen. IT: Manuale dell’assemblea in altre lingue disponibile online.
SAFETY PRECAUTIONS... 02BA Safety precautions MUST be followed at all times throughout the construction of your building! Practice caution with the tools being used in the assembly of this building. Be especially familiar with the operation of all power tools. Care must be taken when handling various pieces of your building since many contain sharp edges. Please wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your building.
ASSEMBLY TIPS & TOOLS 03A Watch the Weather Closely: Be sure the day you choose to install your building is dry and calm. Do NOT attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Use Teamwork: Two or more people are required to assemble your building. One person can hold the parts or panels in place while the other person fastens them together and handles the tools. This makes the process of assembling your building faster and safer.
04BA FREQUENTLY ASKED QUESTIONS Q. How long will it take to assemble the building? A. Assembly time depends on a variety of factors, including roof design, tools available, DIY skill and the pace at which you work. Guidelines for each shed assembly are approximate AFTER completion of the base, and assume two or more people working on the assembly. Generally, you should plan on at least one day working with someone who can assist you; again, after constructing the base.
05BA Q. What kind of base do I use? A. You can: •Pour a concrete slab •Build a wood deck/floor (use exterior-grade plywood) •Use patio blocks •Build on crushed gravel, dirt or grass If you are building a wood deck/floor, an Arrow floor frame kit on top of your deck/floor assembles in minutes and provides a floor frame suitable for a 5/8” exterior-grade plywood floor (not included). A continuous unbroken plastic vapor barrier with a thickness of 6 mil.
06BA PANEL & CHANNEL ASSEMBLY TIPS PANEL 1. Recommend a large table or sawhorses with plywood for working surface. 2. Corners will need to hang off of work surface, so an elevated flat surface is important. 3. Arrows always point up, and always get covered. 4. Start from middle and work your way out to push together panels. 5. Panels can be pulled apart if not aligned properly. Once channels are applied, the wall assembly will be “final”. CHANNEL 6. Work from one end and angle the channel.
CARE & MAINTENANCE... 07BA Exterior Care: For a long lasting finish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or coastal climate region. Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage.
HARDWARE LIST... 08BY Hardware Views by Key No. Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 65923 65103 65004 66646 66715 66718 66720 60H 66860 66847 66721 10280 66866 Part Description Qty. Bolt (#8-32 x 3/8) (10 mm) Hex Nut (#8-32) Screw (#8AB x 5/16) (8 mm) Washer Sheet Door Handle Hinge Padlock Eyelet Corner Cap Peak Cap Vent Gable U-Nut (Door Clip) Corner Clip Door Closure Clip 15 15 132 2 1 2 2 4 2 4 4 8 2 The fasteners used in each step are shown actual size at the top of each page.
PARTS LIST... Key Part No. No.
ASSEMBLY BY KEY NO.
ASSEMBLY BY KEY NO.
ASSEMBLY OVERVIEW 12BA 1 2 3 4 5 6 12
ASSEMBLY OVERVIEW 7 13BA 8 7 9 13
CONSTRUCTING A BASE... 14BA OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.). OPTION 2: Wood Platform If you decide to build your own base, be sure to select the appropriate materials.
Step 1: Side Walls (2X) You will need for this page: 10307 6 10316 2 Panel Wall Panel Wall 10268 2 A Corner Panel 10316 10307 10307 A 10307 2 1 10307 A 10316 15 10268 15BA
Step 1: Side Walls (2X) You will need for this page: A (QTY: 6) A 10268 10316 A A A 16 16BA
Step 1: Side Walls (2X) You will need for this page: 10261 2 A IMPORTANT START ASSEMBLY AT CORNER PANEL Wall Channel 10261 10261 A 10261 17 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 17BA
Step 1: Side Walls (2X) IMPORTANT You will need for this page: 10255 2 10280 4 Floor Channel 18BA A START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip 10255 10268 10280 A 10280 10255 10280 10255 BE SURE TO MAKE TWO (2) SIDE WALL SECTIONS.
Step 2: Rear Wall You will need for this page: (QTY: 3) A 10307 4 10316 1 Panel Wall Panel Wall 10307 10307 10268 1 A Corner Panel 10307 A A 19BA 19 10307 10316 10268
Step 2: Rear Wall You will need for this page: 10262 1 IMPORTANT A START ASSEMBLY AT CORNER PANEL Wall Channel 10262 10262 A 10262 20 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 20BA
Step 2: Rear Wall You will need for this page: 10256 1 Floor Channel 10280 2 21BA IMPORTANT A START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip 10256 10268 10280 A 10280 10256 10280 10256 21
Step 3: Front Wall You will need for this page: (QTY: 1) 11052 (QTY: 4) 2 Door Jamb 10316 2 Panel Wall 11052 22BA 10268 1 A Corner Panel 11052 10316 10316 RIGHT LEFT RIGHT 10268 A RIGHT A 22
Step 3: Front Wall You will need for this page: (QTY: 4) (QTY: 2) 10262 1 10256 1 Wall Channel Floor Channel 10263 1 Header Trim 10262 10263 10262 10263 10256 10264 10256 10264 23 23BK 10264 1 Ramp
Step 3: Front Wall You will need for this page: 1 Wall Channel Assembly (QTY: 4) 1 Floor Channel Assembly 10280 2 24BA IMPORTANT START ASSEMBLY AT CORNER PANEL Channel CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip A (QTY: 4) WALL CHANNEL ASSEMBLY (Painted) 10280 10280 A FLOOR CHANNEL ASSEMBLY (UNPAINTED) IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Channel 10268 A 24
Step 4: Wall Assembly You will need for this page: 1 1 Side Wall Assembly (QTY: 3) 25BA Rear Wall Assembly CORNER PANEL ON TOP OF WALL PANEL A Corner Clip 1 Corner Panel A Wall Panel 2 B B SIDE WALL ASSEMBLY 25 1 2 REAR WALL ASSEMBLY
Step 4: Wall Assembly 26BA You will need for this page: 1 Side Wall Assembly 1 Front Wall Assembly CORNER PANEL ON TOP OF WALL PANEL C Corner Clip 1 Corner Panel Wall Panel 2 C C C D 1 2 D D FRONT WALL ASSEMBLY 26 D SIDE WALL ASSEMBLY
Step 4: Wall Assembly You will need for this page: (QTY: 9) 27 27BA
Step 5: Gable & Beam Assy You will need for this page: Gable Right (QTY: 8) 80111 2 10990 2 11048 1 28BA 10278 2 Gable Left (QTY: 4) Header Angle 10990 Gable Brace BACK 80111 10990 or 80111 FRONT SIDE VIEW 80111 10990 11048 BACK FRONT 10278 10278 BACK 10278 10278 FRONT 28 BACK
Step 5: Gable & Beam Assy You will need for this page: (QTY: 6) (QTY: 4) 10269 1 Ridge Beam 10312 1 Ridge Beam Angle 10269 10312 Large holes face down 10312 BACK FRONT BACK FRONT 29 29BA
30BA Step 6: Roof pre-assy (2X) You will need for this page: (QTY: 8) 10251 2 10252 6 10250 2 Roof Panel Left Roof Panel Roof Panel Right 10251 10252 10252 10267 4 Roof Channel 10320 4 Fascia Trim 10250 10252 10267 10250 LARGE HOLES IN CHANNELS FACE DOWN 10251 10267 10267 10320 10250 10251 10320 30
Step 7: Roof Assembly You will need for this page: 10270 (QTY: 4) (QTY: 1) 1 2 Roof Assembly Ridge Cap LEFT Large holes face down FRONT FRONT LEFT INSIDE OF BUILDING BACK 10270 RIGHT 31 Large holes face down 31BA
Step 7: Roof Assembly You will need for this page: 66860 2 32BA 1 Roof Assembly (QTY: 4) (QTY: 22) Peak Cap RIGHT Large holes face down FRONT FRONT RIGHT INSIDE OF BUILDING BACK 17 6 21,22 2 1 66860 7 8 18 5 16 12 4 3 19,20 13 15 9 10 14 11 66860 FRONT 32
Step 7: Roof Assembly You will need for this page: 4 60H (QTY: 12) Corner Cap 33BA 66847 4 Vent 66847 60H 66847 60H 60H 66847 66847 60H 33
Step 8: Door Assembly You will need for this page: 10361 (QTY: 4) 1 Vertical Door Brace 10369 1 Vertical Door Brace 1 66715 Door Handle 66720 Padlock Eyelet 1 34BK 66721 4 U-Nut (Door Clip) 66721 (2X) 66721 (2X) 10361 66751 10369 66720 66751 66720 10369 SIDE VIEW 34
Step 8: Door Assembly You will need for this page: 10276 (QTY: 4) Door Panel 1 10309 Door Panel 1 10308 1 Door Panel 10275 2 Horizontal Door Brace 35BK 2 Vertical Door Brace Assy 10308 10276 10309 10275 10275 35
Step 8: Door Assembly You will need for this page: (QTY: 9) (QTY: 3) 10288 2 Diagonal Door Brace 10288 BACK 10288 FRONT 36 36BK
Step 8: Door Assembly You will need for this page: (QTY: 6) 66718 2 (QTY: 8) Hinge 66720 Padlock Eyelet 66781 66866 66781 66720 66720 66866 66781 66866 37 1 66866 2 Door Closure Clip 1 Door Assembly 37BK
ARROW ACCESSORIES... 38BA ANCHOR KITS Model No. AK4 Anchor Kit contains heavy-duty steel augers, 60' (18 m) of steel cable and 4 cable clamps. No digging or concrete pouring, just insert cable under roof, over roof beams, into augers and twist augers into the ground. For buildings larger than 10'x9' (3,0 m x 2,6 m), use 2 kits. FLOOR FRAME KITS MODELS FKEZEE and FKEZ65 A simple floor frame system made of heavy-duty, hot-dipped galvanized steel. Use as base for plywood, sand or stone. See Page.
ANCHORING OPTIONS... 39BA IMPORTANT: It is important that building be anchored after construction. These are recommended ways of anchoring. Anchor into Wood or Concrete Arrow Anchoring Kit: (Model No. AK100) For wood platform. Use Decking Screws. For concrete slab. Use Lag Screws. Recommended for use with the concrete base. Contains: Corner gussets, perimeter clips, hardware, 1/4" masonry drill bit and installation instructions. Arrow Anchoring Kit: (Model No.
