Full Product Manual

17
Step 1: Side Walls
17CG
Bring Top Panel down fl at while
maintaining pressure in the middle
to keep edge hooked.
Start in middle of assembly to snap
Panels together.
Push down to snap Panels together
working from center outward in both
directions.
Push down to snap end of
Panels together.
Apply pressure in
area shown
10998
10998
Always cover
the Arrow.
Raise Panel at Angle.
7
Hook Edge of Top Panel to
Bottom Panel.
9
8
Overlap Panels
and Align Ends.
ALWAYS COVER
THE ARROW
MUST USE FLAT SOLID
SURFACE. DO NOT SNAP ON
GROUND OR GRASS
maintaining
pressure
Top Panel
Bottom Panel
Top Panel
Bottom Panel
12
10
11
13