Owner's Manual

You will need for this page:

Step 13: Door Installation & Adjustment

From inside the building, put the

bottom of the right door assembly

(on your left when you are inside)

behind door jamb into the front

ﬂ oor frame track.

Fasten the door to the door

slides using two #10Bx1/2” (13

mm) screws per door slide.

Position the top of the door so

that the holes in the door line up

with the holes in the door slides.

26BL

Repeat steps 1 through 3 for the left door.

The holes in the door slides allow

you to adjust the doors. Place the

door in the middle holes.

Closed Position

Half-Open Position

INSIDE BUILDING

Front Floor Frame

Door

Door Slide

Door Track

Gable

If Doors do not align, raise or lower one side of the Door by placing

the Door screws through a different set of holes in the Door Slide.

Door Adjustment

Assemblies from Step 12:

• Right Door Assembly (1)

• Left Door Assembly (1)

(QTY: 8)