Owner's Manual
24
Tuck Flange Inward to Fit Inside of Roof
Trim Cap
You will need for this page:
Step 11: Roof Trim
Attach the roof trim to the ends of the roof panels on the
front and rear of the building using screws at each roof
panel overlap.
1
A single screw fastens both
trim pieces at the overlap.
24BL
Roof Trim
2
80002
80002
(QTY: 4)
SS
(QTY: 4)
SS
Using your thumb and index fi nger, overbend the bottom fl ange of the roof trim at the corner inward
enough so the right and left roof trim caps fi t onto right and left corners.
2
Fasten the roof trim caps to the roof trim using a screw.
3
2
Right Roof
Trim Cap
66183R
2
Left Roof
Trim Cap
66183L