Owner's Manual

22
(QTY: 10)
The front leg of the gable must be positioned
inside of the front header.
You will need for this page:
Step 9: Corner Panels
23BL
SS
Front
10562
Bottom leg of gable must slide into opening between
side wall angle and top of panel.
Position the right gable at the right end of the completed roof by tucking top edge inside the rib
of the right roof panel and sliding the lower leg inbetween the leg of the side wall angle and top
edge of the wall panels.
1
(QTY: 6)
Right Gable
1
10562
Left Gable
1
80015
Fasten to the right roof
panel, side wall angle
and front header using
screws, bolts and nuts as
shown.
2
Repeat steps 1 and 2 for
the left gable.
3
Wall Panel
Side Wall Angle
Gable
End View
Step 10: Gables
23