Instructions / Assembly

16
Step 3: Front Wall
16H
You will need for this page:
(QTY: 24)
(QTY: 34)
Insert Front Wall Diagonals into the Front
Wall Assembly as shown and secure with
Large Screws.
3
10640
Wall Post
2
10652
Wall Post
(Hinge)
2
10627
Front Wall
Channel
6
10628
Front Wall
Diagonal
4
Left Front Wall Assembly
10640
10640
10652
10652
10627
10627
10627
10628
10628
10628
10628
10673
10639
Fascia pieces should fi t inside Front Frame as shown.
10673
10673
10638
10639
10673
Front Frame
2
10638
Long Fascia
1
10639
Short Fascia
1
Lay out the parts and position them as
shown. Double check that holes align as
shown. If holes do not align, the Wall Post
(Hinge) is most likely upside-down.
1
2
Insert the Front Wall Channels into the Wall
Post and Wall Post (Hinge) as shown and
secure with Small Bolts and Nuts.
Assemble two Front Frames together with
the Long and Short Fascias as shown
below and secure using Large Screws.
4
Right Front Wall Assembly
Door Header Assembly
LS
SB
LS
LS
LS
SB
SB
SB
SB
SB
LS
SB
SB
SB
SB
SB
SB
LS
LS
LS
LS SB
LS
LS