Installation Guide

42
42H
You will need for this page:
7
Secure all Diagonal Braces to the Vertical
Door Braces with Large Screws as shown.
Next, position the Cane Bolt Bracket back-
to-back against the Vertical Door Brace closest
to the center of one (1) Door as shown. Slide the
Cane Bolt Bracket to the bottom of the Door and
secure with three (3) Large Screws. Repeat for
other Door.
8
Align the Cane Bolt with the holes in the
Cane Bolt Bracket and Vertical Door
Brace and secure with six (6) Large
Screws as shown. Repeat for other Door.
Cane Bolt
2
66780
Cane Bolt
Bracket
2
10675
10675
(QTY: 26)
LS
Inside
Inside
Right Door
Left Door
66780
Inside
BOTH DOORS
10675
Latch Plates shown
for alignment only,
install on page 44.
The Cane Bolt, Door Handles
and Slide Bolt are pre-packaged
with their own hardware. This hardware is
not used when assembling the building.
Instead, use the hardware indicated in each
step.
Step 13: Continued