Instructions / Assembly

29
You will need for this page:
29AP
Attach Brace to Gable then rotate to align with Roof Beam.
Attach the Roof Beam Brace to the
Track Support with one Small Bolt
and Nut as shown.
8
9
Rotate to align with Roof Beam and
secure to Roof Beam with one Small
Bolt and Nut as shown.
Beam Brace
1
9204
9204
(QTY: 2)
SB
Attach Brace to Track Supports and Main Beam.
9204
10’x10’ (3,0 m x 3,1 m)
building shown.
Tab end attaches to Roof Beam.
Angled end attaches to Gable.
Working with one Gable at a time, attach the Gables to the top Front Header with Large Screws. Do not
insert screws into the two holes closest to where the Gables join. These will be used to attach the Track
Support later. Repeat Steps 9-3 thru 9-9 to install Gables at the front of the building.
10
Step 9: Continued