Instructions / Assembly

14
14H
You will need for this page:
(QTY: 15)
(QTY: 8)
10629
Rear Frame
4
10630
Rear Wall
Channel
2
10631
Rear Wall
Diagonal
2
10640
Wall Post
3
Lay out the parts and position them as shown. Overlap the Rear Frames by
4” (10,2 cm) and connect them to the Wall Post in the center of the Rear
Wall using Small Bolts and Nuts as shown. Do not tighten at this time.
1
2
Attach other two Wall Posts at the sides of the Rear Wall using Small
Bolts and Nuts as shown. Attach both Rear Wall Channels using Small
Bolts and Nuts. Slide the Rear Wall Diagonals into the Frame and secure
with Large Screws.
LS SB
overlap length:
4” (10,2 cm)
10631
10629
10629
10629
10629
10630
10630
10631
10640
10640
10640
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
LS
LS
LS
LS
LS
LS
LS
LS
INSIDE
OUTSIDE
If you purchased a Door Kit, skip this page and move on to page 16.
Step 2: Rear Wall