Use and Care Manual

17
Step 38: Extension Spring Assembly
28FF
66
Attach pulley with a 3/8” x 1-1/2” bolt and hex nut on
angle which attaches horizontal track to fl ag angle.
Repeat this step for opposite side of door.
1
3/8” Hex Nut
3/8” x 1-1/2” Bolt
Pulley
Clamp locking
pliers to back
leg of track
REVERSE SIDE
With a minimum of two people, raise door
to fully open position.
2
You will need for this page:
Pulley
2
3/8” x 1-1/2” Bolt
and Hex Nut
2
Secure the door fi rmly at both sides
with locking pliers. Connected to the
track as shown.
3