Warranty

 Parts Needed For 
Trim 12x10 (3,7 m x 3,0 m)
Step 25
BW36
 5220 Side Roof Trim (2)
 6014 Side Roof Trim (2)
 7846 Right Rake (2)
 7845 Left Rack (2)
STEP
6
STEP
5
STEP
2
STEP
1
STEP
4
STEP
3
1Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2Position left and right rake to the
ends of roof, noting that rake slips
under ridge cap, but  ts on top of side
roof trim. Fasten rake to the center
of roof panel rib using a bolt.
3Fasten roof panel rib, rake, peak
cap and ridge cap together using bolts
and nuts. Fasten remaining peak cap
in the same manner.
4Using your thumb and index  nger,
overbend the bottom  ange of the side
roof trim at the corner inward enough
so the right and left roof trim caps  t
onto right and left corners.
5Fasten rake to side trim using a screw
into roof panel.
6Fasten the roof trim caps to the side
trim using a screw.
#10-32x7/16" (11 mm) Bolt
#10-32 Square Nut
Peak Cap
Right Rake
Left Rake
#8Ax5/16" (8 mm) Screw
Roof Trim Cap
7846
5220
Side Roof Trim
7845
6014
Tuck Flange In-
ward to Fit Inside
of Roof Trim Cap
38