Warranty

 Parts Needed For 
Ridge Caps 12x10 (3,7 m x 3,0 m)
Step 23
BW34
 7828 Middle Roof Panel (2)
 7843 Ridge Cap (1)
 7827 Left Roof Panel (1)
 6874 Ridge Cap (1)
1
STEP
1Temporarily remove right rear roof
panel.
2Install 2 middle roof panels. Fas-
ten 2nd roof panel rib overlaps with
a bolt and nut. Press 2 strips over
the bolt heads. Continue weather
stripping.
3Install the right and left roof panels
at the rear gables. Follow fastener
sequence.
4Position a ridge cap 7843 on the
completed front roof section.
5Install the second ridge cap 6874
overlapping the  rst ridge cap. Align
the holes and fasten using bolts.
6Fasten the lower end of the panels
to the side top angle using screws.
4
STEP
2
STEP
3
STEP
5
STEP
6
STEP
#8Ax5/16" (8 mm) Screw
#10-32x7/16"
(11 mm) Bolt
#10-32 Square Nut
6874
Do not fasten
this end
Weather Stripping
7843
7828
7828
7828
7827
Do not fasten
this end
36