Warranty

Each wall panel has a crimped rib on
1 side. The crimped rib should go
under the rib of the panel that follows
it. Leave out 1 main wall panel at the
side or rear entry door location.
1 Fasten the main wall panels at
the top and bottom with screws.
2 Fasten center of each panel to
the mid frames with screws. Fasten
overlapping ribs using 2 screws and
a bolt with nut at the center.
3 At the rear center of the building,
fasten the medium wall panel in the
same manner.
Step 11
BW23
 Parts Needed For 
Walls All Sizes
 7822 Main Wall Panel (see below)
 7823 Medium Wall Panel (1)
STEP
3
STEP
1
IF YOU ARE BUILDING A 12x24 (3,7 m x 7,3 m)
Install 3 additional main wall panels on each
side of the building.
IF YOU ARE BUILDING A 12x31 (3,7 m x 9,4 m)
Install 6 additional main wall panels on each
side of the building.
7823
#8Ax5/16" (8 mm) Screw
Crimped Rib
Underneath
At the truss columns, fasten rib with bolt,
washer & nut before screws are installed.
Detail Showing
Center of Panel Screwed
to Side Frame
Bolt and nut
does not go
thru side frame
at overlap
7822
#10-32 Square Nut
#10-32x7/16" (11 mm)
Screw
Washer
SCREWS TO FRAME
MEDIUM WALL PANEL
SCREW
TO RIB
BOLT TO
PANEL
SCREW
TO RIB
SCREWS TO FRAME
WIDE RIB
NARROW RIB
(HAS BEAD)
SCREWS TO
FRAME
STEP
2
25