Warranty

END VIEW
OF TRACK
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1 Fasten front columns to the bot-
tom and mid front frames with bolts
and nuts. Flange with 2 holes at each
end must be facing outside. Fold front
panel slightly away from column to
tighten bolts and nuts.
2 Fasten right and left front frame
to the top of front wall panels using
4 screws.
3 Position lintel across top of frames
and columns and fasten with bolts.
4 Position rear frame assembly
across top of main wall panels and
fasten using screws.
Step 10
BW22
 Rear Frame Assembly (1)
 7915 Side Top Angle (see below)
 7838 Side Top Angle (2)
 7958 Door Track (1)
#10-32 Square Nut
STEP
2
7
STEP
1
5 Fasten side top angles 7915 to
the truss column using a screw and
to rear corner panels using screws.
6 Fasten side top angles 7838 un-
der 7915 and fasten to front corner
panels using screws. Fasten over
lap (2 1/2" [6,4 cm]) with 2
bolts and nuts. Side angles
overlap front and rear frames in the
corners. Fasten support column to
side top angle using a bolt and nut.
7 Position door slides onto the legs,
from the end of door track, as shown
in the end view.
8 Position door track to the inside
of side top angle, butted up against
support column. With short  ange of
track at bottom, fasten angle to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
See Step 12 for rear door installation.
 7839 Front Column (2)
 7834 Right Front Frame (1)
 7835 Left Front Frame (1)
 7831 Lintel (1)
7958
IF YOU ARE BUILDING A 12x24
(3,7 m x 7,3 m)
Repeat side top angle assembly using
2 additional angles 7915.
IF YOU ARE BUILDING A 12x31
(3,7 m x 9,4 m)
Repeat side top angle assembly using
4 additional angles 7915.
8531
8532
7915
7838
7834
7831
7839
7839
7835
#8Ax5/16" (8 mm)
Screw
#10-32 x7/16" (11 mm)
Bolt
INSIDE
2 HOLES
STEP
3
FRONT OF
BUILDING
FACING
INSIDE
STEP
4
STEP
6
STEP
5
STEP
8
SIDE TOP
ANGLE
LONG
FLANGE
SHORT
FLANGE
TRACK
INSIDE
2 HOLES
STEP
 Parts Needed For 
Frames
12x17, 12x24 & 12x31
(3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m)
24