Warranty

The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1 Fasten front columns to the bot-
tom and mid front frames with bolts
and nuts. Flange with 2 holes at each
end must be facing outside. Fold front
panel slightly away from column to
tighten bolts and nuts.
2 Fasten right and left front frame
to the top of front wall panels using
4 screws.
3 Position lintel across top of frames
and columns and fasten with bolts.
4 Position rear frame assembly
across top of main wall panels and
fasten using screws.
Step 9
BW21
 Parts Needed For 
Frames 12x10 (3,7 m x 3,0 m)
INSIDE
STEP
5
STEP
1
 7839 Front Column (2)
 7834 Right Front Frame (1)
 7835 Left Front Frame (1)
 7831 Lintel (1)
 Rear Frame Assembly (1)
 7838 Side Top Angle (2)
 7958 Door Track (1)
7835
STEP
2
5 Fasten side top angles to the
corner panels using screws. Fasten
support column to top angle using
a bolt.
6 Position door slides onto the legs,
from the end of door track, as shown
in the end view.
7 Position door track to the inside
of side top angle, butted up against
support column. With short  ange of
track at bottom, fasten angle to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
See Step 12 for rear door installation.
8532
8531
79587834
2 HOLES
SIDE TOP
ANGLE
SHORT
FLANGE
LONG
FLANGE
STEP
7
STEP
4
#8Ax5/16" (8 mm) Screw
7838
#10-32 Square Nut
7831
TRACK
INSIDE
2 HOLES
FRONT OF
BUILDING
FACING
INSIDE
#10-32x7/16" (11 mm) Bolt
7839
STEP
3
7839
STEP
6
END VIEW
OF TRACK
23