Warranty

1 Install a corner wall panel at the
corner of the  oor frame as shown.
The widest part of each corner panel
must be placed along the side of the
building for all 4 corners. Fasten the
corner panel to the  oor frame with
4 screws.
Support the corner panel with a step
ladder until a wall panel is attached.
2 Attach the front wall panels to
the front corner panels, as shown.
3 Attach the main wall panels to
the rear corner panels, as shown.
NOTE
Be careful to install the correct
panel in each position as shown.
4 Double-check the part numbers of
the wall panels, before proceeding.
Each screw and bolt in the wall re-
quires a washer.
Step 6
BW18
 Parts Needed For 
Corners All Sizes
 7824 Corner Wall Panel (4)
 7825 Front Wall Panel (2)
 7822 Main Wall Panel (2)
7824
#10-32 Square Nut
#10-32x7/16" (11 mm)
Bolt
7822
The  oor frame must be square
and level or holes will not align.
Washer
7822
Washer
#8Ax5/16" (8 mm) Screw
7824
7825
7824
7824
STEP
4
STEP
2
STEP
3
7825
7825
7822
7822
SIDE
SIDE
REAR
FRONT
7824
7824
7824
7824
Narrow
Side
STEP
1
Wide Side
TOP VIEW
7825
CORRECT
INCORRECT
20