Specifications

General Maintenance
Replace the Printer Paper
When the printer paper runs out, use the following steps to replace it
with a new roll of paper:
To order printer paper rolls, refer to "Obtaining Service and
Supplies" in this guide.
1 Shut down the SelfCheck™ System (refer to "Shutting down the
SelfCheck System" in this guide).
2 Open the right side panel of the SelfCheck system.
3 Slide the printer assembly out of the model 6210 chassis.
4 Locate the print head lever and move the lever from the
Engaged position to the Full Release position.
5 Lift the empty paper roll and roll pin out of the printer assembly.
6 Remove the paper roll from the roll pin.
7 Place a new paper roll on the roll pin.
8 Place the paper roll and roll pin on the printer assembly with the
tag end of the paper coming off the bottom of the paper roll.
9 Feed the leading end of the paper roll into the printer assembly.
Be sure the end of the paper roll is not ragged or it will not feed
properly.
10 Press the line feed button on the side of the printer assembly
until the paper feeds completely through the print head area of
the printer.
11 Move the print head lever from the Full Release position to the
Engaged position.
12 Tear off any excess paper.
13 Slide the printer assembly back into the 6210 chassis.
14 Close the side panel.
78-8123-7438-3 Rev B, 060-A
27