Specifications

Starting the SelfCheck™ System
1 Turn ON the power switch on the back of the SelfCheck™ System.
2 Log in using your designated password if required. The system
automatically starts the SelfCheck system program.
Shutting down the SelfCheck System
Press **316# on the keypad and wait for the screen message
indicating it's safe to turn the system off, then turn OFF the power
switch on the back of the system.
To shut down the SelfCheck system while the SelfCheck
program is NOT running, use the mouse to click Shut Down in
the Windows™ Start menu.
Starting the SelfCheck™ Manager Software
Use the following steps to start the SelfCheck Manager software:
If the keyboard is not plugged into the SelfCheck system, start
at step 1. If the keyboard is already plugged in and the
SelfCheck system is running, start at step 6.
1 Press **316# to shut down the SelfCheck system.
2 Turn OFF the power switch on the back of the SelfCheck
system.
3 Open the right side panel on the SelfCheck system.
4 Plug the keyboard into the keyboard into the keyboard port.
5 Turn ON the power switch on the back of the SelfCheck system.
The SelfCheck program starts.
6 Press the Esc key on the keyboard when the clock appears on
the SelfCheck system screen. The Windows™ desktop appears
on the screen.
7 Double-click the SelfCheck Manager icon on the Windows™
desktop. This starts the SelfCheck™ Manager software.
SelfCheck™ Manager icon
78-8123-7438-3 Rev B, 060-A
16