Specifications

Preparing Library Patrons for the SelfCheck System
To prepare library patrons for using the SelfCheck system,
thoroughly review the SelfCheck system documentation. Then,
consider scheduling patron orientation sessions to demonstrate the
operation of the system. Demonstrate each different process for
checking in and checking out items from your library. For example,
using the Video Checkout Unit (VCU) to checkout videos.
A librarian may need to monitor the new machines to offer
assistance to patrons who are unfamiliar with the system for an
extended period of time.
Site Planning
1 Verify there is a table or cabinet with an adequate work surface
for the SelfCheck™ System. The recommended size is:
 Height: approximately 39 in. [990 mm]
 Width: 30 in. [762 mm]
 Depth: 33 in. [838 mm]
To prevent interference with the scanner laser light, never
install the SelfCheck system in an area where ambient light
brightness exceeds that of the laser, or where it could be
exposed to direct sunlight.
2 Verify power is available within 3 ft [914 mm] of the SelfCheck
system.
SelfCheck System Specifications
Physical Characteristics
Height
32 inches [835 mm]
Width
22 inches [635 mm]
Depth
31.5 inches [815 mm]
Weight
125 lbs. [56,8 kg]
Shipping Weight
218 lbs. [99 kg]
Operating Environment
Temperature
50º to 104ºF [10º to 40ºC]
Humidity
20 to 80%
System Power Requirements
Voltage
100-120/200-240 VAC
Amperage
4.0/2.0 Amps
Frequency
50/60 Hz
Phase
Single
Power
200 Watts
78-8123-7438-3 Rev B, 060-A
11