Outdoor Storage User Manual

Step 15
O Parts Needed For ®
Ridge Caps & Panels
• 6869 Ridge Cap (2)
• 6641 Left Roof Panel (1)
• 6640 Right Roof Panel (1)
$28
"1 Install 1 ridge cap on the com-
pleted roof section using bolts and
nuts. Fasten the roof panel rib, peak
cap and ridge cap together using
bolts and nuts.
6869
2 Fasten the remaining left and right
roof panels as you un roll the weather
stripping tape, and press it down,
install the second ridge cap overlap-
ping the first ridge cap. Align holes
and fasten using bolts and nuts. Fas-
ten the remaining peak cap in the
same manner.
3 Fasten the lower end of the panels
to the side wall angles using screws
and washers. Use bolts and nuts
through wall angle overlaps at the
bottom of the panel.
6869
?
I
6640
Peak Ca[
Cut Weather
Strippingand
Fold Under
6641
28