Outdoor Storage User Manual

Step 13
® Parts Needed For ®
Right Roof Panel
O 6640 Right Roof Panel {1)
$26
Installing the roof panels is best done
with a step ladder. Begin installing
roof panels at the back right corner of
the building. Each screw and bolt in
the roof requires a washer.
NOTE
Measure the building diagonally
again and make adjustments to
make sure the building is square.
This will make the roof panels fit
better, and holes will align.
6641
6529
6529
6640
6640
6529
_6 6529
6641
NOTE
If a Roof Beef=Up Kit was
purchased, assemble prior to
attaching the roof panels.
FRONT
1 Locate all the roof panels by their
numbers and place them on the
ground alongside the building in their
proper positions.
6 thru 9
6640 Right Roof Panel
1
3
,-- 4
2 Position a right roof panel at the
back right corner and fasten to the
gable and roof beams using screws
and bolts and nuts as shown. Do not
fasten the lower end of the panels to
the side waft angles at this time.
Hint: Follow the fastener sequence
shown, for proper alignment.
FRO N
26