Outdoor Storage User Manual

Step 8
® Parts Needed For ®
Wall Panels
0 8995 Wan Panel (8)
L]N21
Each wall panel has a crimped rib on
one side. The crimped rib should go
[Z]
under the rib of the panel that follows
it.
1 Locate all of the wall panels and
set each one alongside the building.
2 Be surethatyou have the correct
panels in each position. Do this by
overlapping the panels and deter-
mining if the holes line up with the
holes in the frame.
8995
8995
8995
Panels rest on
frame as shown
Crimped Rib
Underneath
3 Fasten the wall panels at the top
and bottom with screws.
Detail Showing
Center of Panel
Screwed to
Wall Channel
4 Fasten the center of each panel to
the wall channel with screws. Fasten
overlapping ribs using a bolt and nut
with two screws.
Bolt and nut
does not go thru
wall channel
at overlap
5 When you have attached all wall
panels in the correct positions, the
building will look like this.
Use bolts and
nuts thru wall
angle overlap
at the top of
panel at rear.
21