Outdoor Storage User Manual

O5988 Rear Wall Angle (2)
tpC"e- e Needed e .99 7Rea Wa,,C,anne, 2)
Frame Assemblies o 9923S_dewa.C.anne_(4)
• 9298 Side Wall Angle (4)
SIS
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1 Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2 Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
9917
RearWall Channel
118 1/8" 3,0m
9917
9923
Side Wall Channels
111 5/8" 2,8m
9923
together with one bolt in the center
hole of each set.
3 Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one boltin
the center hole.
9298 Side Wall Angles
929_ 111 5/8" 2,8m
4 Make two side wall angles by
overlapping the side wall angle piec-
es as shown. Fasten each set togeth-
er with one bolt in the center hole.
5 Set the assemblies aside. You will
use them later.
Rear Wall Angle
118 1/8" 3,0m
Side Wall Angles
1115/8" 2,8m
15