Outdoor Storage User Manual

08934 Ramp (1)
C_,d.._. t ® Parts Needed For O • 9367FrontFloorFrame(2)
_1
_V= I Floor Frame Assemblies ®8936RearF_oorFrame(2)
• 9299 Side Floor Frame (4)
$14
The front floor frame is made up of
three pieces. The side floor frames
and the rear floor frame are made up
of two pieces. The holes in these
pieces will align when the pieces are
positioned with correct amount of
overlap. The illustrations below show
the proper overall length for the sides,
rear and front. Proceed as follows:
9367
9299
"1 Place the front floor frames as
shown. Center the ramp, with drain
holes facing outside, on top of the two
front floor frames. Join the frames by
inserting eight screws.
20vedap the aidefloor frames and
the rear floor frames as shown. The
holes in these pieces will align when
the pieces are positioned with cor-
rect amount of overlap. See the illus-
trations below for the proper overall
length of the side and rear floor frames.
Join the frames by inserting five bolts
into each frame set as shown.
3 Double check the length of each
and set these pieces aside for later
use.
97 99 Front Floor
_ 9'_, 8934 9'9', Frame Assembly
__ _ 1193/8" 3,0m
- DRAIN HOLES FACE "
OUTSIDE
9299 _lht_!_t
,__ -- '_1=_ Side Floor Frame 112 7/8"
B 9299 2,9m
Rear Floor Frame 119 3/8"
_l 8 3,0m
8936 I ! *,t _ _r 8936
• 112 7/8"
_'' Side
112 7/8" 2,9m
1193/8" 3,0m
Front & Rear
1193/8" 3,0m
2,9m
14